Detailed Product Description

Product Name: Pressurized Solar Collector

Basic description: 

Manifold Casing Material: SUS304 grade stainless steel

Frame Material:SUS304 grade stainless steel

Header Pipe Material: C12200 Copper

Insulation: Polyurethane foam

Rubber Seals and Rings: Stabilized high temperature silicone rubber

Optimal installation angle: 30-70o Vertical, 0 Horizontal

Maximum Operating Pressure: 0.60.8 MPa

Optimal flow rate: 0.1L/min/tube - 0.026G/min/tube

Specifications:                                                                             

1. Water tanks are made by machine. Flower design pressed on aluminum alloy(or stainless steel) shell, beautiful and durable.Inner water tank is made of supper SUS304 food grade stainless steel plates, welded by argon arc. Water is pure and drinkable.

2. Warm keeper of water tanks adopts polyurethane's celluar, thickness is 60mm.

3. Aluminum alloy(or stainless steel) supports are connected by bolts and nuts, firm and stable, easy to install.

4. .Between vacuum tubes and inner water tank, we adopt milk white silicon glue rings to connect and seal them.

5. .The tubes and supports are adjustable, power bearing is average, and can assure the vacuum tubes to use long time.

The operation of our solar collector is very simple.
1. Solar Absorption: Solar radiation is absorbed by the solar tubes and converted into heat.
2. Solar Heat Transfer: Heat pipes conduct the heat from within the solar tube up to the header pipe.
3. Solar Energy Storage: Water is circulated through the header, via intermittent pump cycling. Each time the water circulates through the header the temperature is raised by 5-10oC / 9-18oF. Throughout the day, the water in the storage tank is gradually heated.

Products model